Greencisco Industrial Co., Ltd.

Inverter for Military

Greencisco military aviation inverter (converter) is a 400Hz or 50Hz single-phase and three-phase static inverter power supply designed and manufactured specifically for aviation and military electronic equipment. Its output power ranges from 50VA for single-phase to 45KVA for three-phase. It can be widely used in aircraft onboard equipment, radar, navigation and other mission systems, as well as other places that require 400Hz intermediate frequency power supply or 50Hz onboard power supply. The product is applied in military aviation, navigation system exchange power supply, land, sea and air force detection system, and satellite navigation system. Implementing standard GJB181 Aircraft Power Supply Characteristics and Requirements for Electrical Equipment GJB151A Military

Characteristics

Introduction
Greencisco military aviation inverter (converter) is a 400Hz or 50Hz single-phase and three-phase static inverter power supply designed and manufactured specifically for aviation and military electronic equipment. Its output power ranges from 50VA for single-phase to 45KVA for three-phase. It can be widely used in aircraft onboard equipment, radar, navigation and other mission systems, as well as other places that require 400Hz intermediate frequency power supply or 50Hz onboard power supply. The product is applied in military aviation, navigation system exchange power supply, land, sea and air force detection system, and satellite navigation system. Implementing standard GJB181 Aircraft Power Supply Characteristics and Requirements for Electrical Equipment GJB151A Military。
Product Features
1. Adopting high-frequency switching transformation and waveform closed-loop control technology, the inverter has good output performance and system stability;
2. Using three independent inverters for phase-locked control, it has strong resistance to load imbalance and can be applied to three-phase completely unbalanced loads;
3. Output overcurrent protection adopts interception protection, which has strong adaptability to load impact;
4. By utilizing the low loss advantages of MOSFET and IGBT high-frequency switching modes, SPWM conversion is completed to make the inverter have the characteristics of small size, light weight, high efficiency, and high reliability;
5Standardized design makes the maintenance of inverters simple and efficient.

Specification

Model

GRM-0.5K

GRM-1K

GRM-2K

GRM-3K

GRM-5K

GRM-8K

GRM-10K

GRM-20K

GRM-30K

Capacity

0.5KVA

1KVA

2KVA

3KVA

5KVA

8KVA

10KVA

20KVA

30KVA

Circuit mode

IGBT / SPWM pulse width modulation

Work mode

Offline/Online/Inverter (can be choose)

AC input(optional)

AC110V/AC220V/AC380V

Charging mode

Three-stage intelligent charging of constant current-constant voltage-floating charge

(optional)

DC input

DC12V/24V/28V/48V/96V/110V/220V/500V/600V, (which can be choose)

Output voltage

AC36V±2%/115V±2%/220V±2%/AC380V±2%(which can be choose)

Output frequency

50HZ±0.05%/60HZ±0.05%/400HZ±0.05%/1000HZ±0.05%(which can be choose)

Voltage stabilization

≤±1%

THD

Linear load ≤3% , nonlinear load ≤5%

Power factor

0.1-1.0

0.8(inductive and capacitive load)

Efficiency

≥ 91%(from battery)

≥ 98%(from AC)

Transfer time

<4ms

Response time

At load from 0~%100% or 100%~0%之,output voltage≤2%

Noise(1M)

50~60dB

Display

LED

EMC

GJB151A-97  RE101,RE102,CE101,CE102

Protection

Overvoltage, undervoltage, overload, short circuit, overtemperature and other protection

Military standards

Damp-heat: According to GJB150.9-86《 environmental test method for military equipment damp-heat test 》 , there is no obvious rust on the equipment, each performance index is normal

Mould: According to GJB150.10-86《 environmental test method for military equipment, Mould Test 》, Salt fog: According to GJB150.11-86

Vibration: According to GJB150.16-86

Low pressure: Below 5000 m (including 5000 m) , all performance indexes are normal.

Insulated reactance

500Vdc  20MΩ

Voltage-resisting insulation

1500Vac/5mA/for 1minute

Cooling

Forced fan

Work Temperature

-40℃~70℃

Storage temperature

-55℃~80℃

Related humidity

0~90%(non-condensation)

Communication

RS232/RS485

Charging current

10A-200A  optional

Batteries

External

Appearance

Rack mount, modular type, vehicle-mounted type optional