Frequency Converter for Aviation gyroscopes
Frequency power supply with 1000Hz output is widely used for military and aviation gyroscopes, Navy,shipyard, ship,dock,port, salah docks.airport.ect.
Application
Special power supply for the armed forcesdetection systems, navigation systems,satellite navigation systems,military and aviation gyroscopes,pure resistive,capacitive,inductive or nonlinear loads can be used.ect
Introduction
Frequency power supply with 1000Hz output is widely used for military and aviation gyroscopes.Its main feature is to provide pure and reliable power, with low harmonic distortion,high stability of the frequency and voltage stability rate with 1000Hz sine wave power output. This power supply can solve almost all power supply problems, such as AC high voltage, AC low voltage, voltage instantaneous drop, amplitude oscillation, high-voltage pulse, voltage fluctuation, surge voltage, harmonic distortion, clutter interference,frequency fluctuation and other power supply issues.
Features
Specially designed with output voltage of 36Vac/3Phases, 1000Hz for military and aviation gyroscopes.
With dual power conversion, providing pure and reliable sinusoidal power output, is the best power supply for R & D and laboratory.
With 19”rack mount
For 100% loading or no-loading, the output load can be stabilized immediately at 1% linear load.
Allows for long-time working at 100% full load;The inverter and power analog supply can withstand an instantaneous overload of more than 3 times the rated current without voltage drop.
With overvoltage, overcurrent, overtemperature,short-circuit protection and alarm device.In case of abnormal condition, the electronic circuit of the machine will automatically detect and immediately protect, at the same time, to send an alarm and notify the users to do emergency treatment.
Specification
Model | FC300-36/1KHZ | |
Capacity | 300VA | |
AC input | Phase | Single phase+ground |
Voltage | 220V±15% | |
Frequency | 50Hz±5% | |
Power factor | 0.6~0.7 | |
AC output | Waveform | Pure sine wave |
Phase | 3phases+4 wires | |
Voltage | 36VAC(0-40VAC) | |
Current | 4.8A | |
Frequency | 1000Hz | |
Frequency stability | ≤0.01% | |
Voltage stability | ≤±1% | |
THD | ≤2% (linear load) | |
Crest factor | 3:1 | |
Efficiency | ≥85% | |
Response time | Maximum 100uS | |
Indication / resolution | Digital Voltmeter 0.1V | |
Phase shift | load is three-phase balanced or no load:≤±10% ; | |
Protection | Shortcircuit | Electronic circuit detection |
Overload | Electronic circuit detection | |
Overtemperature | Electronic circuit detection | |
EMI/EMC | Input/output filter | |
Overvoltage protection | 43.5V | |
Cooling | Forced fan | |
Environment | Working temperature | 0℃—45℃ |
Relative humidity | 0-90%( Non-condensable) | |
Altitude | 1500m | |
Dimension(W×DxH) mm | 483×400×133 (3U) |