Engine starting Battery Chargers
This series of high-voltage products can be used as a start-up power for a variety of heavy weapon equipments (rocket,tanks,aircraft, ships, armored vehicles,etc.)
Introduction
Starting-up DC power supply with battery charging, engine starting, welding and other functions. In cold season or cold area, the product can be used to start the engine or replace the battery directly to start motor and charge the battery automatically. Suitable for 12V/24V gasoline and diesel engines as starting power (such as motorcycles, cars, construction vehicles, freight trucks, gasoline, diesel generator, etc.) . Also can be used as starter, engine, large special DC power for high-low voltage starting performance test. This series of high-voltage products can be used as a start-up power for a variety of heavy weapon equipment (rocket, tanks, aircraft, ships, armored vehicles, etc.)
This series of products using rectifier transformer isolation and rectifier unit and advanced electronic control technology of carefully designed and manufactured. 12V and 24V can shift gears, charging and start-up can be switched, starting fast, with constant voltage output does not damage batteries.
The dual-purpose power supply of starting and charging can completely solve the emergency starting of all kinds of heavy-duty vehicles under the cold and low temperature conditions. To ensure the normal operation of the equipment.
For starting DC output: with 12V, 24V two-way terminal. There are also automatic and manual switching options for users.
The 270Vdc aviation power supply is a high voltage DC power supply specially designed and manufactured for the power supply of new generation fighters and airborne equipment. It adopts PWM voltage mode control and IPM high frequency full bridge transform technology, which has fast dynamic response, strong over-current ability and low output ripple. The DC starting power has the advantages of small volume, light weight, low noise, high efficiency, simple operation,ect.
Specification
Model | SDC series charger and motor starting power |
Input voltage | 380VAC±10%/3Phases/50Hz |
Start voltage | 12Vdc or 24Vdc |
Maximum current | 2500A for 12Vdc,3000A for 24Vdc |
Charge voltage | 0-80Vdc can be continuously adjusted |
Charge current | 0-30A can be continuously adjusted |
Display | LED display |
Altitude | ≦4000m |
Insulation | 2500Vdc for 1 minute |
Protection | Overvoltage,overcurrent,shortcircuit,overtemperature,ect |
Noise | ≦50db |
Dimension | 800x500x1200mm |
ODM | Can be customized per customers eeds |